Journal Information
Journal of Applied Science and Engineering Innovation
ISSN 2331-9062 (Print)
ISSN 2331-9070 (Online)
Journal of Applied Science and Engineering Innovation is an academic journal organized by the American Computational Science Society, which mainly publish the participants' papers in the annual International Conference on Applied Science, Engineering and Technology (ICASET) published a year. It usually do not accept the submission of non participants.
Current Issue
2019 Vol.6 No.1
Flame retardancy and thermal properties of lanthanum alginate
Author:
Author affiliation:
Abstract: The lanthanum alginate (Alg-La) and sodium alginate (Alg-Na) film were prepared via wet coating and confirmed by FTIR. The flame retardancy and thermal degradation of films were investigated by microscale combustion calorimetery (MCC) and thermogravimetric analysis (TG). The MCC results indicated that the addition of rare earth ions mainly reduced the release of combustible gaseous products at lower temperatures and thus reduced the HRR values of Alg-La. The results of TG showed that the thermal stabilities of Alg-La were better than Alg-Na, and the weight of residual char was higher than Alg-Na at higher temperatures. Scanning electron microscopy (SEM) images of the residues indicated that the Alg-La film produced denser than Alg-Na film did. The La3+ exhibit a significant effect on the thermal degradation behavior of alginate. The results obtained from this study presented some beneficial massage for comprehending the flame retardancy mechanism of alginate and designing biomaterials with better flame retardant properties.
Keywords: Alg-La; Alg-Na; film; thermal degradation; flame retardancy
How to Cite this Article:
. Flame retardancy and thermal properties of lanthanum alginate, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 1-4.
A Floating Garbage Disposal Vessel
Author: 3
Author affiliation: 1 Qingdao Huanghai College, Qingdao 266427, China
2 Enbur Engineering Co. Ltd., 236306, Mich, United States
Abstract: "green water and green mountains are mountains of gold and silver". At present, domestic river management and water cleaning work lack of unity and coordination, floating objects on the surface of the source is numerous, cleaning range is wide, but water cleaning funds are insufficient, resulting in water garbage seriously affect the image of the city, causing economic losses. However, special personnel are required to take charge of the garbage salvage work. The salvage personnel work in coastal areas on the ship surface, and the ship equipment is backward, which poses certain safety risks. In addition, the salvage personnel need to work in the harsh environment for a long time, which can easily cause discomfort and lead to diseases. In order to maintain the water environment of scenic lakes, urban inland rivers and coastal areas, this project designed an automatic water garbage collector, aiming to change the current lack of high efficiency and intelligent water garbage cleaning method, which is dominated by manual cleaning. The floating garbage cleaning guard includes the hull, the hull driving mechanism, the collection and transportation device, the solar panel group and the control system. The front part of the hull has a gap in the middle part, and the middle part of the hull has a collection box, which is located at the back side of the gap. The hull driving mechanism is arranged at the rear and lower part of the hull, which comprises a propeller, a reducer and a first motor. The propeller is located outside the hull and is connected to the first motor through the reducer. The collecting and conveying device is installed at the gap on the front side of the hull, including the mounting bracket, the conveying belt and the second motor. The mounting bracket is fixed on the front side of the hull. The conveying belt is set on the mounting bracket through the active roller and driven roller, and the output end of the second motor is connected to the active roller. The utility model has the advantages of reasonable structure design, low manufacturing cost, replacing manual salvage, saving time and labor, safety and reliability, flexible operation, small dead Angle of salvage, high degree of automation, good collection effect and high efficiency. This project can be combined with specific water area for path planning, effectively improve the efficiency of garbage cleaning, save human resources, and has a broad market prospect.
Keywords: Garbage, Collect Clean up, Environmental protection, Transfer
How to Cite this Article:
, A Floating Garbage Disposal Vessel, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 5-8.
Design of Environment Temperature and Humidity Acquisition System of Internet of Things Based on Cloud Platform
Author:
Author affiliation: 1 Qingdao Huanghai Institute of Intelligent Manufacturing, Qingdao, Shandong Province 266427,China
2 PR ChinaInstitute of Physical and Theoretical Chemistry, University of Tuebingen, Auf der Morgenstelle 15, 72076, Tuebingen, Germany.
Abstract: With the rapid development of science and technology, the collection of temperature and humidity has been widely used in various industries. The transportation and storage of special medical supplies, seafood products and dairy products are strict to the temperature and humidity. This paper introduces a cloud platform based on STM32 microcontroller to control chip acquisition system design scheme, the data of temperature and humidity temperature and humidity acquisition system is described in detail design, hardware design, software design. Paper the temperature and humidity acquisition system development present situation, through to the existing collection system was studied, and identify the feasibility scheme to ensure data accuracy, real-time detection system of collecting the data of temperature and humidity, easy to check. The alarm function of the acquisition system is designed according to the research requirements and practical analysis. Finally, the design requirements are achieved through systematic testing and multiple optimization.
Keywords: temperature and humidity; cloud platform;STM32 MCU; alarm function
How to Cite this Article:
Liu Zheng, Oran Yingbanditpong. Design of Environment Temperature and Humidity Acquisition System of Internet of Things Based on Cloud Platform, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 9-13.
Analysis on the Impact of Intelligence Collection and Processing Technology on Operational Effectiveness
Author:
Author affiliation: Aviation University of Air Force of Jilin Province Changchun, China
Abstract: The intelligence collection and processing technologies have been applied in combat. Some new features of intelligence processing have emerged such as omnipotence input methods, intellectualization of processing methods and diversity of distribution methods. The intelligence collection and processing technologies have great influence on command efficiency in information leading modern warfare for example the reaction speed of weapons, intelligence information timeliness and enhancing operational command efficiency. In order to improve command efficiency, we proposed several ideas. First, the reconnaissance and communication equipments should be developed, especially advanced reconnaissance and early warning satellite, advanced warning and reconnaissance radar that can detect stealth aircraft, and digital communication equipments with communication satellite as the main part. The second is to improve the overall efficiency of the existing reconnaissance equipment and communication equipment. Third, expand channels of intelligence and communications security.
Keywords: Intelligence; Collection; Processing technologies; Effectiveness
How to Cite this Article:
Zhihuan Lan, Yiguo Ji, Haiyan Tang. Analysis on the Impact of Intelligence Collection and Processing Technology on Operational Effectiveness, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 14-17.
Design of Intelligent Greenhouse Monitoring and Control System based on PLC
Author:
Author affiliation: 1 Qingdao Huanghai University Qingdao 266427, China;
2 Lomsee Company Ltd., Saudi Arabia
Abstract: Modern agriculture is developing more and more towards refinement and scale. It is very important to design an intelligent greenhouse automatic monitoring and control system. The automatic control system based on PLC realizes real-time monitoring of illumination intensity, temperature, carbon dioxide concentration and other parameters. Data transmission and control are realized based on ethernet. The system has simple structure and stable operation. Through field application test, the system can meet the needs of users and greatly improve the management efficiency of greenhouse.
Keywords: Ethernet; PLC; Intelligent Greenhouse; Automatic Control
How to Cite this Article:
. Design of Intelligent Greenhouse Monitoring and Control System based on PLC, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 18-21.
Coal Mine Technology Management and Its Importance Analysis
Author:
Author affiliation: 1 China Coal Technology Engineering Group Chongqing Research Institute, Chongqing 400037, China.
2 State Key Laboratory of the Gas Disaster Detecting Preventing and Emergency Controlling, Chongqing 400037, China.
Abstract: In order to strengthen the technical management level of coal mines, on the basis of the review of the prior art management, combined with the main content and responsibilities of the coal mine enterprise's own technical management system, the concept of coal mine technology management was defined, and the importance analysis of each index was carried out by using grey correlation analysis. The research results show that the impact of various indicators on safety performance in coal mine technology management is from: large to small: equipment maintenance and renewal costs, number of new technology introduction and application, number of safety (technical) management, number of safety training, number of optimized systems, engineering Reserve fee. Through the research of this paper, it provides a corresponding reference for the technical management of coal mines.
Keywords: Coal mine; Technology management; Importance analysis; Safety performance
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 22-25.
Application of Individualized Service System for Scientific and Technical Literature In Colleges and Universities
Author:
Author affiliation: School of Computer and Software Engineering Huaiyin Institute of Technology, Huaian 223001, China.
Abstract: In order to solve the issue of information overload caused by massive scientific and technical literature, the accuracy rate of pushing the literature to the users is improved. A personalized service system for teachers and students based on Word2Vec is proposed. The preparation of reptile digging knowledge, the Chinese patent database technology literature and the use of Lucene-based full-text retrieval program for data retrieval. Through the word vector model, the title of the literature is abstracted, and the similarity between the full word segmentation and the user interest ontology is used to extend the user interest preference word pocket model, which solves the problem of system data sparseness and cold start. On the basis of 1.2 million scientific and technological literature achieving a good effect. The experiment has obtained the recommended accuracy rate of 82.3% of the scientific literature, and provided the reference for the science and technology literature recommendation algorithm. The system teachers’ and students’ demand for the efficiency of literature retrieval.
Keywords: High-speed Ethernet; Electromagnetic performance; Crosstalk
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 26-30.
Research on the Development Trend of Renewable Energy in Low Carbon Environment
Author:
Author affiliation: Department of Economic Management, North China Electric Power University Baoding, 071000, China.
Abstract: With the accelerated transformation of the world's energy into green, low-carbon and clean, renewable energy has gradually become the core of global energy transformation, accelerating the pace of development of “low-carbon” renewable energy systems in the world. Based on the analysis of the development characteristics, influencing factors and future development trends of renewable energy systems, it is considered that China's renewable energy development potential is huge, and the investment in renewable energy should be increased on the basis of further optimization and adjustment of energy structure.
Keywords: Low carbon; Renewable energy; Development trend
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 31-35.
Study on the Open Architecture of Industrial Robot Control Systems
Author:
Author affiliation: Automation and Electronic Engineering Institute, Qingdao University of Science & Technology, Qingdao, Shandong, 266071, China.
Abstract: As an important part of industrial robots, control systems restrict the development of robot technology to some extent. This paper, firstly, it summarizes the research of open robot control system, and focuses on the structural characteristics of industrial robot control system and the open software and hardware implementation methods of the system. Then it also summarizes the application status of open control system in multi-robot collaborative control, and last the future development direction of the control system is forecasted.
Keywords: Robot Control System, Industrial Robot, Open Architecture
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 36-38.
The Challenge and path Choice of RMB internationalization in Belt and Road Initiativeundefineds Construction
Author:
Author affiliation: 1 School of Economics, Hebei University, Baoding, China;
2 Finance department , Hebei Finance University, Baoding, China;
3 School of Management, Hebei University , Baoding, China.
Abstract: The construction of Belt and Road Initiative, launched by China in 2015, has brought new vitality and opportunity to the internationalization of RMB. Since the trial in 2009, RMB internationalization has made remarkable achievements, but at the same time, it faces many challenges such as low degree of RMB internationalization and high risk. Therefore, how to accelerate the process of RMB internationalization with the help of the expansion of the investment and financing needs of the countries and regions along the "Belt and Road Initiative" is a question worthy of in-depth study.
Keywords: Belt and Road Initiative, Internationalization of RMB Challenge, Path Choice of RMB internationalization
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 39-42.
Risk Assessment of Chinese Enterprises' Foreign Direct Investment in African Agriculture
Author:
Author affiliation: Faculty of College of Business , Hebei Agricultural University, Baoding City, Hebei Province, China.
Abstract: The “going out” initiative of agriculture has brought opportunities for Chinese companies to invest directly in foreign agriculture, accompanied by varying degrees of risk. This paper uses factor analysis to empirically analyze the risks of Chinese enterprises' direct investment in African agriculture. The empirical results show that West Africa and South Africa have relatively low investment risks; East Africa has moderate investment risks; Central Africa and North Africa have higher investment risks. In the face of these foreign direct investment risks, enterprises should improve their risk prevention capabilities, and the government should increase policy support.
Keywords: Foreign direct investment, Investment risk, Factor analysis
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 43-47.
The Impact and Countermeasure of Internet Economic Form on Business Circle Format——A Case Study of Nanjing East Road, Shanghai
Author:
Author affiliation: College of architecture & urban planning, Tongji University, Shanghai, China.
Abstract: This paper aims at the impact of network business format on the real business format in CBD area of Nanjing East Road, Shanghai under the situation of Internet economy. The environment and orientation of this business circle are analyzed, and the problems and contradictions of the business format in this region are put forward. Combining with the concept of RBD, the reform countermeasures for the commercial format of this region is put forward in this paper.
Keywords: Internet Economy, Central Business District (CBD), Recreational Business District (RBD), Data Analysis
How to Cite this Article:
, Journal of Applied Science and Engineering Innovation, 2019, 6(1), 48-52.